Fruit quality and oil extraction rate: what drives a mill's margin
How the oil extraction rate (OER) is defined, what raises or lowers it, how the provincial table feeds the fruit price and what to test when valuing a mill.
6 min read
A palm oil mill buys fruit and sells oil. The ratio between the two is the oil extraction rate (OER, or rendemen in Indonesian). It tells you how many kilograms of crude palm oil (CPO) come out of every 100 kilograms of fruit that go in.
Small changes in that ratio carry a lot of money. They also show up on both sides of the mill’s books: in what it pays for fruit and in what it earns from oil.
What the rate means
Agriculture Minister Regulation 13 of 2024 defines the CPO rate as the weight of CPO a mill can produce divided by the weight of fruit it processes, multiplied by 100%. It defines the kernel rate the same way for palm kernels. Both are percentages of the fruit’s weight.
Two things follow from the definition:
- The rate is measured at the mill, after the fruit has been cut, carried, graded and processed. Every loss on the way counts against it.
- The rate can be a table value, set by the government for a province, or an actual value, measured at one mill. They are not the same number, and the gap between them is the mill’s own performance.
For scale, take a mill that processes 270,000 tonnes of fruit a year. Each percentage point of CPO on that volume is 2,700 tonnes of oil. That’s an illustration, but it shows why buyers of mills test the rate before anything else.
What lifts and lowers it
The rate starts in the field. The mill can’t extract oil the fruit doesn’t hold.
- Ripeness. Fruit cut at the right moment carries the most oil. Unripe bunches hold less, and overripe fruit loses oil and raises the free fatty acid content of what is made.
- Time. Fruit breaks down after harvest, so long delays between the cut and the mill lower the oil quality. The article on mills and fruit explains the 24-hour rule.
- Palm type and age. Most planted palms are the tenera type, which has more oil than the older dura type. The yield and oil content also change with the age of the palms, as plantation age and yield describes.
- Handling. Loose fruit that falls from the bunch and isn’t collected is oil left on the ground. Bruised fruit loses quality on the way.
- The mill. Sterilising, pressing and clarifying all lose some oil. Oil stays in the fibre, the empty bunches and the effluent, and worn presses and poor control lose more of it.
The mill controls the last item. The first four belong to the estates and the smallholders behind it, which is why a mill that cares about its rate spends effort in the field.
Grading
The mill grades each load at the weighbridge. The point is to set what the mill pays for and to give suppliers a reason to deliver good fruit. Under the 2024 rule, a load that doesn’t meet the conditions for ripeness, bunch size, loose fruit and cleanliness can be docked or refused, with fixed formulas for the deductions. The details are in mills and fruit.
Grading cuts both ways for a buyer. Strict grading protects the rate but can push suppliers to a competitor. Loose grading keeps the supply flowing but fills the mill with poor fruit, which lowers the rate and the oil quality at the same time. Look at the mill’s grading records and compare them with the rule, and ask how often suppliers dispute a grade.
How the rate enters the fruit price
For partner smallholders, the rate sets what the fruit is worth. The 2024 rule’s formula takes the growers’ share, called the K index, and multiplies it by the value of the oil and the kernel in a kilogram of fruit. That value is the CPO price times the CPO rate plus the kernel price times the kernel rate.
Which rate it uses depends on the grower:
- For plasma growers, the table rate for the province applies. The Director General of Plantations sets the table for each province, and it has to be evaluated at least once every five years.
- For independent smallholders, the rule applies a correction to the table. The tenera CPO rate is taken at 90% of the table, the dura rate at 81% of the tenera table and the kernel rate at 110% of the table. A grower can instead agree to a rate based on a test, once the test result exists.
- The value of shell the mill sells instead of burning is added to the price, counted at a shell yield of 2% to 2.5% of fruit weight.
The provincial table is a policy value, so it can differ from what a given mill achieves. If the mill’s actual rate is above the table, the mill keeps the difference. If it’s below, the mill pays suppliers for oil it doesn’t recover. Check which side the mill is on. What moves palm oil prices covers the price side of the same formula, including the levies that sit between the world price and the mill gate.
What to test when valuing a mill
The rate is the first number a buyer should rebuild from records.
- Take the monthly weight of fruit processed and the monthly weight of CPO and kernels sold, and compute the actual rates. Do it for at least three years, since a single good year hides a trend.
- Compare the actual rate with the table rate for the province. Ask why any gap exists.
- Look at the seasonal pattern. A rate that falls in the peak months suggests the mill is overloaded and loses oil it could recover.
- Ask for the lab results on oil lost in the empty bunches, the fibre and the effluent, and for the mill’s quality results on free fatty acid, moisture and dirt.
- Check the fruit mix. A mill that relies on dealers’ fruit will have a lower and less stable rate than one fed by its own estates.
- Check where the fruit is sorted. If the mill’s supply chain includes collection points, find out how long fruit waits there.
Then model the downside. A drop of one percentage point in the rate on the volume above is a loss of 2,700 tonnes of oil a year, and a mill’s margin can be thin enough for that to matter. Put a range of rates into the cash flow, as how an estate is valued does for yields and prices.
Before you rely on a rate
- Use measured rates from the weighbridge and sales records, not figures from a sales memo.
- Ask which rate the supply contracts use for each group of growers.
- Match the rate to the age profile and the fruit sources, and see how it moves when the mix changes.
- Test the plant’s own losses with an independent technical adviser. The full list of mill checks is in buying a palm oil mill.
General information, not legal, tax or investment advice. Rules change, so confirm the current regulation with a notary or lawyer before you act.