Empty fruit bunches, fibre and fronds as biomass
What a palm oil mill and estate leave behind, from empty fruit bunches and fibre to fronds and old trunks, and how each is used as fuel, compost or pellets.
5 min read
Only a small part of an oil palm becomes oil. The rest is biomass: the bunch the fruit grew on, the fibre left after pressing, the kernel shells, the fronds cut during harvest and, every 25 years or so, the trunk itself. In a region with as much oil palm as Kalimantan, that’s a very large amount of material.
Some of it already has a job. Some is a disposal problem. For an investor, the question is which streams can be collected at a cost that leaves something over, and whether taking them away harms the estate.
What the palm leaves behind
At the mill, fruit bunches go through steam sterilisation and then a threshing drum that knocks the fruit off. What’s left is the empty fruit bunch (EFB, in Indonesian tandan kosong or tankos). The fruit is pressed, which leaves mesocarp fibre. The nuts are cracked, which leaves kernel shells. Commonly cited figures put EFB at around a fifth of the weight of the fruit processed, fibre at a little over a tenth and shells at about a twentieth, but the real numbers vary by mill and fruit.
In the field, harvesters cut one or two fronds with each bunch, and the estate prunes more. When an estate replants, it fells palms that are 10 metres tall or more and have to be dealt with.
Shells are a traded fuel with export buyers, covered in their own article on palm kernel shells. This one deals with the rest.
Fibre: already spoken for
Most mills burn fibre, with some shells, in their boilers. The steam drives turbines for the mill’s electricity and heats the sterilisers. A typical mill is largely self-sufficient in energy this way, which is why fibre rarely leaves the site.
Fibre only becomes available for sale if the mill finds another energy source, such as biogas from its effluent (see biogas from mill effluent), or upgrades to a more efficient boiler. That’s one reason mill energy projects are often planned together.
Empty fruit bunches
EFB is the biggest stream that a mill doesn’t use itself. It comes out of the mill wet, often around 60% water, and bulky. In the past many mills burned it in incinerators to make bunch ash, but open burning is no longer acceptable for most buyers and permits.
Today most EFB goes back to the estate. Spread as mulch between the palm rows, it returns potassium and other nutrients, holds moisture and cuts the need for fertiliser. The cost is transport: trucks carry fruit to the mill and can carry EFB back, but spreading it takes labour, and blocks far from the mill rarely get any.
Other uses exist:
- Compost. EFB can be shredded and composted, often with effluent sprinkled on to speed it up and add nutrients. The result is easier to spread than raw bunches.
- Boiler fuel. After shredding and pressing to drive out water, EFB can be burned, though its high potassium content can cause slag in boilers built for wood or coal.
- Pellets and fibre products. EFB fibre can be pelletised for fuel or processed into mats and other materials, though the moisture and ash have to be dealt with.
Each of these competes with the mulch the estate already gets for free. Taking EFB away for sale means buying more fertiliser to replace it. Run that sum before assuming EFB is a waste with no value. The article on fertiliser and estate running costs shows how big the fertiliser bill already is.
Fronds and trunks
Fronds stay in the field, stacked between the rows. They protect the soil, reduce erosion and slowly return nutrients. Agronomists generally advise against removing them, and collecting them from across an estate would cost more than they’re worth in most cases.
Old trunks are a different matter. At replanting, an estate has to clear thousands of felled palms per hundred hectares. Burning them is banned under the rules against land clearing by fire, and burning on peat is a serious fire risk (see peatland fire and plantation risk). Most estates chip the trunks and leave them to rot, which can breed beetles and the fungus that causes basal stem rot, a serious palm disease. Projects to turn trunks into sap, fuel or board have been tried, but none has become standard. A biomass business that solves trunk disposal at replanting would meet a real need, but test the costs carefully.
What makes biomass pay or not
The main cost in any biomass business is moving wet, bulky material. EFB is mostly water, so every kilometre it travels costs money for little energy. Projects that work tend to sit at or next to the mill, use material that’s already gathered there and turn it into something denser and drier before it travels.
The buyer matters as much as the cost. Possible buyers include the mill’s own boilers, industrial plants nearby that burn biomass in place of coal or diesel, power plants that co-fire biomass, and export buyers for pellets. Each needs a contract with clear specifications on moisture, ash and size, and a price formula. Remote mills in Kalimantan often have no industrial buyer within easy reach, which is why so much EFB still goes back to the field.
Sustainability claims need records too. Buyers of biomass fuel, especially in Japan, Korea and Europe, increasingly want proof of where it came from and that the estate meets certification standards. See bioenergy certification.
What to check first
If you’re looking at a biomass project linked to a mill or estate:
- Measure the actual tonnage of each stream at the mill for at least a year, including the seasonal peaks and troughs.
- Find out what each stream is used for now, and what it would cost the estate to replace it.
- Map the buyers within reach and get indicative prices and specifications in writing.
- Check who owns the biomass. In a supply contract, it may belong to the mill, the estate or a partner.
- Ask which permits the processing site needs, from environmental approval to industrial licences.
A project that starts with an offtake contract and a mill willing to supply tends to hold up better than one built on estimates of how much biomass exists on paper.
General information, not legal, tax or investment advice. Rules change, so confirm the current regulation with a notary or lawyer before you act.